Ecofires eko 2050 Anleitung zur Fehlerbehebung

installation and user instructionsAll instructions must be handed to user for safekeepingRevision A - 07/11Country(s) of destination - GB/IEeko 5090hi

FITTING THE DECORATIVE FRAME ASSEMBLYRemove the glass facia panel from any protective packaging. The glass facia panel is supported by four M6screws w

BRIEFING THE CUSTOMERAll instructions must be handed to the user for safekeeping. Show the customer how to light and controlthe fire. After commission

PILOT ASSEMBLYClean the pilot assembly with a soft brush and blow through. Check the aeration holes are free of any dirtor lint. Clean thoroughly in

TROUBLESHOOTING GUIDEFire sparks but pilot does not light • No gas to fire, check isolators are open and gas supply is on.• Pipework blockage, clean o

USER INSTRUCTIONSSection Content Page No1.0 Important Notes 12.0 Clearances to Combustibles 13.0 Ventilation & Room Size 24.0 Operating Instructio

CLEARANCES TO COMBUSTIBLES - continuedClearances to combustible materialsCombustible materials are defined as wood, fabrics, or other materials likely

COMBUSTION MONITORING SYSTEMThis fire is fitted with a combustion monitoring safety device (ODS). If the appliance shuts down during usefor no appare

eko 5090

INSTALLATION INSTRUCTIONSPreliminary Notes Before InstallationThis appliance is a high efficiency, flueless, flame effect gas fire. It provides radi-

11.0© 2011 Focal Point Fires plc.IMPORTANT NOTES• This appliance is a high efficiency, flueless catalytic flame effect gas fire. It provides radiant

INSTALLATION REQUIREMENTSIf the appliance is to be sited near a disused or unserviceable fireplace served by a natural draught flue thenthe old flue m

SITE REQUIREMENTS (continued)Clearances to non-combustiblesNon combustible surfaces are defined as brick, metal, marble, concrete etc. and also a numb

VENTILATION (continued)Any ventilation fitted must comply with BS 5871 part 4 and BS 5440 part 2. Ventilation fitted under, orwithin immediate vicini

FIXING THE APPLIANCERemove any protective film coatings from the fin-ished/decorative surfaces of the appliance. After having select-ed the final moun

TESTING AND COMMISSIONINGTurn on and test the gas supply up to the fire for any leaks, in accordance with the current edition of BS689.For Republic of